The influence of dilute sulfuric acid pretreatment on biogas production from wheat plant

Dilute sulfuric acid pretreatment was used to improve the biomethane production from wheat plant (WP) via mesophilic anaerobic digestion. The pretreatments were performed at 121°C for different time durations of 10, 30, 60, and 120 min. The maximum methane yield of 302.4 mL/g volatile solids (VS) was obtained after the pretreatment for 120 min, which was 15.5% higher than that of the untreated WP. The highest amounts of lignin removal (15.2%) and xylan degradation (91.5%) were also achieved after this pretreatment. The pretreatment for 60 min enhanced the methane yield by 8.9%, while the pretreatments for 10 and 30 min had no positive effects on the methane yield. All of the pretreatments significantly removed the hemicelluloses. Moreover, the qualitative analysis of the untreated and pretreated WP structure showed significant reduction in the crystallinity index accompanied by the destruction of surface layers of WP structure after pretreatment.     

Comparative assessment of respiratory and other occupational health effects among elementary workers

Objective. This study was conducted to assess hazards faced by elementary workers. Methods. A questionnaire survey and a respiratory function test (spirometry) were carried out on 150 respondents. Results. Major hazards identified related to sharp objects, heavy weight lifting, thermally harsh conditions, working at height, whole body vibration, chemicals, pathogens, increased noise levels and confined space entry. Workers suffered from upper and lower respiratory disorder symptoms, digestive problems, optical and musculoskeletal issues, etc. Spirometric measurement showed obstructive lung disorders to be highest among construction workers (CW) (48%) followed by sanitation workers (SW) (32%) and solid waste pickers (SWP) (28%). Restrictive lung pattern was dominant among SW (56%) followed by SWP (46%) and CW (42%). The observed FEV₁/FVC in diseased SWP, SW and CW ranged from 51 to 96%, from 52 to 98% and from 31 to 99% respectively while observed mean FEV₁ was 2.15, 1.79 and 1.70 L, respectively. Conclusion. The study findings show that occupational exposure can significantly influence respiratory system impairment and contribute to other ailments among elementary workers. The study recommends use of appropriate protective equipment and regular medical examination for early recognition of any health risk so that timely interventions for effective management may be undertaken.     

Determination of ultra-trace amounts of cadmium by ET-AAS after column preconcentration with a new sorbent of modified MWCNTs

The present research reports on the application of modified multiwalled carbon nanotubes as a new, easily prepared, and stable solid sorbent for the column preconcentration of ultra-trace amounts of cadmium in aqueous solution. Multiwalled carbon nanotubes were oxidized with concentrated HNO₃ and modified with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol and then were used as a solid phase for the column preconcentration of Cd(II). Elution was carried out with 0.5 mol?L^?1 HNO₃. The amount of eluted Cd(II) was measured using electrothermal atomic absorption spectrometry. Various parameters such as pH, sample and eluent flow rate, eluent concentration, breakthrough volume, and interference of a great number of anions and cations on the retention of analyte on sorbent were studied. Under the optimized conditions, the calibration graph was linear in the range of 0.67 ng?L^?1 to 5.0 μg?L^?1 and the detection limit (3S_b, n?=?7) was 0.14 ng?L^?1 in initial solution. A preconcentration factor of 300 and relative standard deviations of ±3.6 % for seven successive determinations of 3 ng of Cd(II) were achieved. The column preconcentration was successfully applied to the analysis of river water, waste water, and Persian Gulf water sample.     

Determining the most suitable areas for artificial groundwater recharge via an integrated PROMETHEE II-AHP method in GIS environment (case study: Garabaygan Basin, Iran)

Flood spreading is a suitable strategy for controlling and benefiting from floods. Selecting suitable areas for flood spreading and directing the floodwater into permeable formations are amongst the most effective strategies in flood spreading projects. Having combined geographic information systems (GIS) and multi-criteria decision analysis approaches, the present study sought to locate the most suitable areas for flood spreading operation in the Garabaygan Basin of Iran. To this end, the data layers relating to the eight effective factors were prepared in GIS environment. This stage was followed by elimination of the exclusionary areas for flood spreading while determining the potentially suitable ones. Having closely examined the potentially suitable areas using the Preference Ranking Organization Method for Enrichment Evaluations (PROMETHEE) II and analytic hierarchy process (AHP) methods, the land suitability map for flood spreading was produced. The PROMETHEE II and AHP were used for ranking all the alternatives and weighting the criteria involved, respectively. The results of the study showed that most suitable areas for the artificial groundwater recharge are located in Quaternary Q_g and Q^gsc geologic units and in geomorphological units of pediment and Alluvial fans with slopes not exceeding 3 %. Furthermore, significant correspondence between the produced map and the control areas, where the flood spreading projects were successfully performed, provided further evidence for the acceptable efficiency of the integrated PROMETHEE II-AHP method in locating suitable flood spreading areas.     

Environmental risks of farmed and barren alkaline coal ash landfills in Tuzla, Bosnia and Herzegovina

The disposal of coal combustion residues (CCR) has led to a significant consumption of land in the West Balkan region. In Tuzla (Bosnia and Herzegovina) we studied previously soil-covered (farmed) and barren CCR landfills including management practises, field ageing of CCR and the transfer of trace elements into crops, wild plants and wastewaters. Soil tillage resulted in mixing of cover soil with CCR. Medicago sativa showed very low Cu:Mo ratios (1.25) which may cause hypocuprosis in ruminants. Total loads of inorganic pollutants in the CCR transport water, but not pH ( approximately 12), were below regulatory limits of most EU countries. Arsenic concentrations in CCR transport water were <2microgl(-1) whereas reductive conditions in an abandoned landfill significantly enhanced concentrations in leachates (44microgl(-1)). The opposite pattern was found for Cr likely due to large initial leaching of CrVI. Public use of landfills, including farming, should be based on a prior risk assessment due to the heterogeneity of CCR.     

Comparison of first-order-decay modeled and actual field measured municipal solid waste landfill methane data

The first-order decay (FOD) model is widely used to estimate landfill gas generation for emissions inventories, life cycle assessments, and regulation. The FOD model has inherent uncertainty due to underlying uncertainty in model parameters and a lack of opportunities to validate it with complete field-scale landfill data sets. The objectives of this paper were to estimate methane generation, fugitive methane emissions, and aggregated collection efficiency for landfills through a mass balance approach using the FOD model for gas generation coupled with literature values for cover-specific collection efficiency and methane oxidation. This study is unique and valuable because actual field data were used in comparison with modeled data. The magnitude and variation of emissions were estimated for three landfills using site-specific model parameters and gas collection data, and compared to vertical radial plume mapping emissions measurements. For the three landfills, the modeling approach slightly under-predicted measured emissions and over-estimated aggregated collection efficiency, but the two approaches yielded statistically equivalent uncertainties expressed as coefficients of variation. Sources of uncertainty include challenges in large-scale field measurement of emissions and spatial and temporal fluctuations in methane flow balance components (generated, collected, oxidized, and emitted methane). Additional publication of sets of field-scale measurement data and methane flow balance components will reduce the uncertainty in future estimates of fugitive emissions.     

Two-phase partitioning bioreactor for the biodegradation of high concentrations of pentachlorophenol using Sphingobium chlorophenolicum DSM 8671

An organic-aqueous two-liquid-phase partitioning system was developed to degrade high concentrations of pentachlorophenol (PCP). Dioctyl sebacate was selected among 12 non-aqueous phases as the most suitable solvent to control the delivery of PCP to the aqueous phase for being non-biodegradable and biocompatible. In shake-flask experiments, the two-phase system was able to support the removal of 1g PCP l(-1) of total liquid phase. The performance of the two-liquid phase partitioning system (TLPPS) in shake-flask was evaluated under different conditions. At the initial biomass concentrations of 7, 25, and 58 mg dry weight l(-1), the volumetric removal rates of PCP obtained were 25.7+/-0.5, 32.1+/-0.1, and 39.3+/-2.9 mg PCP l(-1)h(-1), respectively. Higher performance was observed at lower organic-aqueous phase ratios (16% and 28%) than higher ones (37% and 44%). In a 2-l TLPPS, the degradation of 10 g PCP was completed in less than 100 h at a total volumetric rate of 142 mg l(-1) h(-1). Kinetics study using Monod model showed that compared to monophasic systems, the biphasic system significantly enhanced the maximum specific growth rate and PCP removal rate. Results of this biphasic system showed no accumulation of unknown by-product(s) which has been reported for physical-pretreatment or high-performance biphasic systems of PCP degradation.     

Temporal distribution of Ephemeroptera, Plecoptera and Trichoptera (EPT) adults at a tropical forest stream: response to seasonal variations

Temporal changes in Ephemeroptera, Plecoptera and Trichoptera (EPT) abundance were investigated monthly from January to December 2008 at a tropical forest stream of Tupah River (TR) at Gunung Jerai Forest Reserve, Malaysia. A total of 1,689 adult individuals belong to 16 families of EPT were collected from TR. EPT populations peaked in May, June and December. Mean EPT abundance was significantly different among months (Kruskal–Wallis test, P < 0.05). Among the three orders, Trichoptera had the most diverse community with eight families reported, followed by Ephemeroptera (six families) and Plecoptera (two families). The family Baetidae was the most abundant ephemeropteran. Meanwhile, caddisfly families Hydropsychidae, Leptoceridae and Lepidostomatidae were abundant at TR. However, plecopterans were mainly represented by Perlidae. There was significant difference in abundance (t = 4.863, P < 0.05) and diversity (t = 7.857, P < 0.05) of EPT adults between dry and wet seasons. Interestingly, abundance of EPT adults was higher in the dry season compared to the wet season. Consequently, seasonality impact on abundance of EPT adults at TR was obvious. The adult population of Trichoptera was dominant during the dry season. However, adults of Ephemeroptera were abundant during the wet season.     

Factors Influencing Unsafe Behaviors and Accidents on Construction Sites: A Review

Objective. Construction is a hazardous occupation due to the unique nature of activities involved and the repetitiveness of several field behaviors. The aim of this methodological and theoretical review is to explore the empirical factors influencing unsafe behaviors and accidents on construction sites. Methods. In this work, results and findings from 56 related previous studies were investigated. These studies were categorized based on their design, type, methods of data collection, analytical methods, variables, and key findings. A qualitative content analysis procedure was used to extract variables, themes, and factors. In addition, all studies were reviewed to determine the quality rating and to evaluate the strength of provided evidence. Results. The content analysis identified 8 main categories: (a) society, (b) organization, (c) project management, (d) supervision, (e) contractor, (f) site condition, (g) work group, and (h) individual characteristics. The review highlighted the importance of more distal factors, e.g., society and organization, and project management, that may contribute to reducing the likelihood of unsafe behaviors and accidents through the promotion of site condition and individual features (as proximal factors). Conclusion. Further research is necessary to provide a better understanding of the links between unsafe behavior theories and empirical findings, challenge theoretical assumptions, develop new applied theories, and make stronger recommendations.     

Equilibrium, kinetic, and thermodynamic biosorption of Pb(II), Cr(III), and Cd(II) ions by dead anaerobic biomass from synthetic wastewater

Purpose

Heavy metals are toxic pollutants released into the environment as a result of different industrial activities. Biosorption of heavy metals from aqueous solutions is a new technology for the treatment of industrial wastewater. The aim of the present research is to highlight the basic biosorption theory to heavy metal removal.

Materials and methods

Heterogeneous cultures mostly dried anaerobic bacteria, yeast (fungi), and protozoa were used as low-cost material to remove metallic cations Pb(II), Cr(III), and Cd(II) from synthetic wastewater. Competitive biosorption of these metals was studied.

Results

The main biosorption mechanisms were complexation and physical adsorption onto natural active functional groups. It is observed that biosorption of these metals was a surface process. The main functional groups involved in these processes were hydroxyl (–OH) and carboxylic groups (C=O) with 37, 52, and 31 and 21, 14, and 34 % removal of Pb(II), Cr(III), and Cd(II), respectively. Langmuir was the best model for a single system. While extended Langmuir was the best model for binary and ternary metal systems. The maximum uptake capacities were 54.92, 34.78, and 29.99 mg/g and pore diffusion coefficients were 7.23, 3.15, and 2.76?×?10^?11 m²/s for Pb(II), Cr(III), and Cd(II), respectively. Optimum pH was found to be 4. Pseudo-second-order was the best model to predict the kinetic process. Biosorption process was exothermic and physical in nature.

Conclusions

Pb(II) offers the strongest component that is able to displace Cr(III) and Cd(II) from their sites, while Cd(II) ions are the weakest adsorbed component.